The time segment of each function was selected based on the retention times observed for the metabolites and reference compounds, and ranged from 0.42 to 1.03 min. To increase the overall performance, the MRM-MS method was built to monitor only one transition channel per MRM function. The most sensitive parent-daughter

ion transition of each derivatized amino acid (i.e., m/z [M-H]+ > 171) was selected for quantitation. The following ionization source settings were used: capillary voltage, 1.99 kV (ESI+); desolvation temperature, Inhibitors,research,lifescience,medical 600 °C; desolvation gas flow rate, 1000 L/h; source temperature, 150 °C. The analyzer settings were as follows. For quadrupole 1, the low mass resolution was 2.91387 and the high mass resolution was 15.1501; while for quadrupole 2, the values were 2.97214 and 14.7422, respectively. Argon was used as collision Inhibitors,research,lifescience,medical gas at a flow rate of 0.15 mL/min. The UPLC-ESI-MS/MS system control and data acquisition were performed with the Waters Corporation MassLynxTM software. Data analysis was conducted with the TargetLynxTM software (Waters Corporation).

3.6. UPLC-ESI-MS/MS Method Inhibitors,research,lifescience,medical Evaluation and Applicability Method evaluation involved the determination of linearity (regression coefficient and dynamic range), sensitivity (detection limits), and reproducibility (relative standard deviations of retention times and peak areas) of the analysis for each amino acid. Working standards with concentration range from 250 μM to 476.8 pM were prepared by serial dilutions of a 500 μM amino acid mix solution spiked with isotopically Inhibitors,research,lifescience,medical labeled

internal standards at 4 × 10−3 g/L. The serial dilutions were performed in a Biomek 2000 Beckman Coulter laboratory Inhibitors,research,lifescience,medical automation workstation (Fullerton, CA) using a solution www.selleckchem.com/products/Vorinostat-saha.html containing the internal standards at 4 × 10−3 g/L in a 50% (v/v) methanol:water mixture in order to keep their concentration constant. After derivatization the concentrations of amino acids were decreased 10-fold and the concentration of all internal standards was maintained constant at 4 × 10−4 g/L. Calibration curves were obtained by replicate injection of each of the derivatized working standards and were constructed as plots of relative peak area (Area amino acid/Area internal standard) versus amino acid concentration using the TargetLynx software. The assignments of internal standards are Dacomitinib given in Table S4. The applicability of the UPLC-ESI-MS/MS method for sensitive throughput analysis of amino acids was evaluated by determination of their concentrations in derivatized Arabidopsis thaliana leaf extracts obtained as described in numeral 3.3 and 3.4. 4. Conclusions An AccQ•Tag-UPLC-ESI-MS/MS method that uses stable-isotope-labeled internal standards and scheduled MRM functions was presented for reliable and sensitive quantitation of amino acids.