5 M HCl learn more solution to be 7 to 8, named ‘B solution’. Next, both suspensions were mixed together under constant stirring for 1.0 h. The mixture solution was, in the first, instance put into a selleck kinase inhibitor water bath at 60°C.Then, under a nitrogen atmosphere and continuous magnetic
stirring, fresh NaBH4 solution (10 mL, 0.1 M) was added dropwise into the mixture solution. This solution was stirred for 4.0 h more. Afterwards, the solution was dialyzed against deionized water for 3 days. Then, the RGO-GeNPs were freeze-dried and collected in a powder form. When the reduction was carried out in the presence of poly(sodium 4-styrenesulfonate), a stable black PSS-RGO-GeNPs solution was obtained. Characterization technique and electrical properties testing The absorption spectra were recorded on a Cary 5000 UV-visible spectrophotometer (Varian Technology Co., Ltd., Palo Alto, CA, USA). Powder X-ray diffraction (XRD) data were collected using a Bruker D8 Advance X-ray diffractometer (Ettlingen, Germany) equipped with CuKα radiation. The FTIR samples were recorded on Equinox 55 IR spectrometer (Bruker) in the range from 4,000 to 400 cm-1 using the KBr-disk method. The TEM micrographs were obtained on Hitachi (H-7650, Tokyo,
Japan) for TEM operated at an accelerating voltage at 80 kV. Energy-dispersive X-ray spectroscopy (EDS) was carried out during the transmission electron microscopy (TEM) measurement. Electrochemical measurements were performed using CR2032 coin-type cells assembled in an argon-filled glove box. For the preparation of RGO-GeNPs, Super carbon black and polyimide (PI) JQ-EZ-05 binder (dissolved in N-methylpyrrolidone) were mixed in a mass ratio of 85:8:7. The resultant slurry was then uniformly coated on a Cu foil current collector and dried overnight under vacuum. The electrochemical cells were assembled with RGO-GeNP electrode or PSS-RGO-GeNP electrode as cathode, metallic lithium foil as anode, and Celgard 2325 porous film (Charlotte, North Carolina) oxyclozanide as separator. The electrolyte used in this work was a solution of 1.2 M LiPF6
dissolved in a mixed solvent of ethylene carbonate (EC) and ethylene methyl carbonate (EMC) (3:7 by volume). In addition, 10 wt% fluoroethylene carbonate (FEC) was added into the above electrolyte as additive. Galvanostatic electrochemical experiments were carried out in a Maccor Series 4000 battery system (Tulsa, OK, USA). The electrochemical tests were performed between 0.01 and 1.5 V vs. lithium at ambient temperature. Results and discussion We have prepared the RGO-GeNPs by a one-step approach. Under the present experimental conditions, GO was suitable for the preparation of RGO-GeNP hybrid because of its large surface area and chemical stability. Morphology observation The morphology and microstructures of GO, the RGO-GeNPs, and the PSS-RGO-GeNPs were analyzed by TEM.